Faucets & Fixtures Installation & Replacement in Atlanta Metro

Time to Replace That Old Faucet or Fixture?

Is that corroded kitchen faucet an eyesore you can't stand anymore, or are you dealing with a fixture so old and leaky that you know a simple repair just won't cut it? These aren't just cosmetic issues; they're signs that a fixture has reached the end of its life and could be causing unseen water damage under your sink or behind your walls. Head's Plumbing Sales and Service, Inc. is ready to help with professional, no-nonsense faucet and fixture replacement across the Atlanta Metro.

Warning Signs Your Fixture is Beyond a Simple Fix

You learn a lot after replacing hundreds of faucets. You start to see the patterns—the little signs that tell you a fixture is on its last legs. Here are the things I tell homeowners to look out for.

Constant Dripping or Leaking at the Base

A drip from the spout is one thing, but when you see water pooling around the base of the faucet on your countertop, that’s a bigger problem. It means the internal seals or the body of the faucet itself has failed. That water isn't just annoying; it's seeping into your countertop and the cabinet below, leading to rot and mold.

Visible Corrosion and Rust

If you see green or blue crust building up on your faucet or reddish-brown rust spots, the metal is breaking down. This isn't just ugly; it's a sign of structural failure. That corrosion weakens the fixture from the inside out, and eventually, it will lead to a much bigger leak than a simple drip.

Seriously Low Water Pressure

When the water flow from one faucet is just a trickle, but others in the house are fine, the problem is inside that specific fixture. Years of mineral buildup from our water here in Georgia can clog the internal channels of the faucet itself, not just the little screen on the end. At that point, cleaning it is a lost cause; the fixture is choked from the inside.

A Loose, Wobbly Faucet Body

If you can grab your faucet and wiggle it, the mounting hardware underneath has failed or worked itself loose. This constant movement puts a huge strain on the water supply lines connected to it. I've seen those lines snap from the stress, causing a full-blown flood under the sink in seconds.

Stiff or Seized Handles

When you have to fight to turn the water on or off, the internal cartridge is shot. Mineral deposits and wear have caused the moving parts to grind together instead of gliding smoothly. Trying to force a seized handle can snap it off or break the valve inside, leaving you unable to shut the water off at all.

Common Causes of Faucet & Fixture Failure in Atlanta

Most of the replacements we do boil down to one of a few common culprits. It's rarely a surprise when we see what's going on under the sink.

Plain Old Age and Wear

Faucets have a lifespan, usually around 10 to 15 years. The rubber O-rings and plastic cartridges inside are under constant pressure and exposed to thousands of temperature changes. Eventually, they just get brittle and fail, and trying to patch up a fixture that old is throwing good money after bad.

Hard Water and Mineral Buildup

The water across the Atlanta Metro area is hard, full of minerals like calcium and magnesium. Over the years, these minerals form a rock-like scale inside your fixtures. We see it all the time in homes from Marietta to Decatur—the scale builds up and chokes off water flow, seizes up handles, and corrodes the metal parts.

Poor Initial Installation

Sometimes a faucet fails early because it was never installed right in the first place. We often find connections that were cross-threaded, gaskets that were installed dry and cracked, or cheap plastic mounting nuts that broke. A poor installation guarantees a leak down the road.

What to Expect From Our Installation Service

When you call Head's Plumbing Sales and Service, Inc. for a faucet or fixture replacement, you're getting a professional, not a handyman. Our process is thorough because we believe in doing the job right so it lasts. We’re a family business built on a reputation for quality work, and we bring that to every home.

First, our technician will show up, listen to what's going on, and take a look at the old fixture. We'll inspect the water supply lines, the shut-off valves, and the condition of the sink or countertop where the fixture is mounted. This helps us spot any potential issues, like corroded valves that also need to be replaced, before we start the job.

Once we confirm a replacement is the right move, we'll get to work. We'll shut off the water and carefully remove the old fixture, cleaning up any old plumber's putty, sealant, or corrosion from the mounting surface. A clean, flat surface is critical for getting a perfect seal on the new fixture. We then install your new faucet or fixture exactly to the manufacturer's specifications, ensuring every connection is tight and properly sealed.

Before we leave, we turn the water back on and test everything thoroughly. We check for flow, hot and cold mixing, and most importantly, we check for leaks—at the faucet base, at the supply line connections, and at the drain. We won't pack up our tools until we're 100% certain the job is done right, and we always leave your kitchen or bathroom as clean as we found it.

Faucets & Fixtures Installation & Replacement Coverage Across Atlanta Metro

From the northern suburbs to the south side, our team provides reliable faucet and fixture services throughout the region. We're your local experts, ready to solve your plumbing problems wherever you call home.

North Metro Atlanta: Marietta, Smyrna, Vinings, Doraville, Dunwoody, Norcross, Roswell, Sandy Springs

West Metro Atlanta: Lithia Springs, Mableton, Austell, Douglasville, Powder Springs

Central & East Atlanta: Atlanta, Decatur, Avondale Estates, Clarkston, Grayson, Scottdale, Snellville

Southeast Metro Atlanta: Forest Park, Conley, Ellenwood, Hampton, Jonesboro, Locust Grove, Lovejoy, McDonough, Morrow, Redan, Rex, Riverdale, Stockbridge

Southwest Metro Atlanta: College Park, East Point, Fairburn, Hapeville, Union City, Fayetteville, Newnan, Palmetto, Peachtree City, Sharpsburg, Tyrone

Related Services

While replacing an old, failing fixture is often the best long-term solution, sometimes a newer faucet just needs a small adjustment or a part replaced. If your problem is a minor drip or a simple mechanical issue, our Faucets & Fixtures Repair & Service may be all you need to get things working properly again.

Get a Faucet That Works and Looks Great

Don't put up with a failing faucet that wastes water, threatens your home with damage, and makes simple tasks a chore. A new fixture can update the look of your room and give you reliable, efficient performance for years to come. With Head's Plumbing Sales and Service, Inc., you're choosing a third-generation family business that has been committed to professional standards and lasting solutions since 1981.

If you're ready to replace that problem fixture for good, reach out through our website today. We'll help you find the right solution and get it installed correctly, the first time.

Need This Service?

Contact us today to discuss your needs. Our team is ready to help.

Schedule Now(678) 203-8627

Other Services

• Faucets & Fixtures Repair & Service
• Faucets & Fixtures Emergency Repair

Service Areas We Cover

• Atlanta
• Service Areas
• College Park
• Decatur
• East Point
• Fairburn
• Forest Park
• Hapeville
• Lithia Springs
• Marietta

View all service areas

Ready to Get Started?

Contact us today for a free estimate. Our certified professionals are ready to help.

(678) 203-8627Schedule Service